Project Planner Form

Enter your screen and cabinet details to get a ballpark for ports, cards, and which controllers to consider.

Back to Forms

Project planner

Ballpark how many output ports and receiver cards you need, and which controller + card pairings are worth a closer look before you quote.

Project specifications

Enter screen and cabinet details, pick one processor and one receiving card, list modular input connectors if applicable, and set the receiver link set.

Receiver link set

Video inputs (planning)

For modular controllers (e.g. U Max, Z8t), add connector types and counts below. For U-series processors, the suggested package infers the input board SKU from this mix and sizes boards from canvas bandwidth plus your connector totals.

Total input connectors: 1. 1× HDMI 2.0

Video outputs (planning)

Add RJ45 Ethernet (1G or 5G) and/or 10G fiber as you plan cabling to receivers. Count is planned ports (runs). The package below estimates output boards from signal math plus these rows.

Planned output ports (your rows): 1. 1× 1G Ethernet (RJ45)

Single cabinet (pixels)

480 x 270 px = 129,600 pixels

16 x 8 cabinets = 128 cabinets

Suggested package

7,680 x 2,160 @ 120 Hz, 10-bit RGB needs about 59,719.7 Mbps before controller-specific packing or overhead.

Screen pixels
16,588,800
Width x height.
Signal data rate
59.72 Gbit/s
Uncompressed RGB active pixels.
Ports: 1G / 5G
64 / 13
Minimum ports from bandwidth only.
Cabinets
128
16 across x 8 high.